Removal Procedure
WARNING:
Refer to Exhaust Service Warning
- Oil Pump Flow Control Valve Heat Shield - Remove - Refer to Oil Pump Flow Control Valve Heat Shield Replacement
Disconnect the electrical connector. (4)
- Wiring Harness Clip (2) - Unclip
- Wiring Harness (3) - Position aside
- Oil Pump Flow Control Valve Bracket Fastener (1) - Remove
- Raise and support the vehicle - Refer to Lifting and Jacking the Vehicle
Oil Pump Flow Control Valve Bolt (1) - Remove
- Oil Pump Flow Control Valve (2) - Remove