LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2019 >> Encore Base >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Negative Cable Replacement (without KL9) >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (without KL9) .
  2. Remove the battery tray. Refer to Battery Tray Replacement .
  3. GM2773967Courtesy of GENERAL MOTORS COMPANY

    Remove the battery ground cable fastener (1).

  4. Remove the battery negative cable (2).
  5. GM2773965Courtesy of GENERAL MOTORS COMPANY

    Disconnect the wiring harness current sensor connector (3).

  6. Remove the body harness ground cable fastener (1) and the body harness ground cable (2), from the battery negative cable (6).
  7. Remove the battery negative cable (6).
  8. GM2027819Courtesy of GENERAL MOTORS COMPANY

    Remove the current sensor (2) from the battery negative cable (1).

scientia non olet · About LEMON Manuals