Front Camber Adjustment

WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:
DO NOT grind the front strut bores for the bolts to allow adjustment of the front camber. There are service bolts available to allow the front camber to be adjusted, if needed.

If the front camber is out of specifications, perform the following:
1. Remove the front strut to steering knuckle nuts (1) and the bolts (2).
2. Replace the front strut to steering knuckle bolts (2) with the service bolts.
3. Install the service bolts and adjust the front camber to specifications. Wheel Alignment Specifications
Tighten the front strut to steering knuckle nuts. Strut Assembly Removal and Installation