Installation Procedure

WARNING: This page is about a different car, the 2018 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Install the battery (2) into position on the battery tray using the assist handles (1).
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Install the battery retaining bracket (1) and tighten the fastener (2) to 9 N.m (80 lb in).
Courtesy of GENERAL MOTORS COMPANY

Install the battery fuse block (3) into position on the battery positive post (4) and tighten the fastener (2) to 4.5 N.m (40 lb in).
Close the battery fuse block cover (1).
Connect the negative battery cable. Battery Negative Cable Disconnection and Connection .
Reprogram the window express function. Window Motor Programming - Express Function
Calibrate the power steering control module. Power Steering Control Module Calibration