Installation Procedure
Wheel Speed Sensor(1) - Install
- CAUTION:
Wheel Speed Sensor Bolt(1) - Install and tighten 9 N.m (80 lb in)
Retainer(1) @ Strut Assembly - Secure
Retainer(1) @ Strut Assembly - Secure
- Retainer(2) @ Wheelhouse - Secure
Wheel Speed Sensor Harness Pass Through Grommet (1) - Secure
- Install the tire and wheel assembly. Tire and Wheel Removal and Installation
- Lower the vehicle.
Wheel Speed Sensor Electrical Connector(1) - Connect
- Reposition and install the radiator surge tank. Radiator Surge Tank Replacement
- Verify the repair is complete. Diagnostic Repair Verification