LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2020 >> Encore Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 1.4L (LUV) - Repair Instructions >> Repair Instructions >> Crankshaft Position Sensor Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Crankshaft Position Sensor Replacement

GM2509003Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the splash shield cover.
  3. Remove the transfer case, if equipped. Refer to Transfer Case Replacement .
1 Crankshaft Position Sensor Fastener
CAUTION:

Refer to Fastener Caution .


Tighten 
8 N.m (71 lb in)
2 Crankshaft Position Sensor

Procedure

  1. Disconnect the electrical wiring harness connector from the crankshaft position sensor.
  2. After replacement of the crankshaft position sensor, use a scan tool to speed up the learn process. Refer to Crankshaft Position Variation Learn .
scientia non olet · About LEMON Manuals