LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2020 >> Envision Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 93 (Suspension Control System) >> Diagnostic Information and Procedures >> DTC C0000 >> Circuit/System Testing
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Circuit/System Testing

WARNING: This page is about a different car, the 2018 Buick Regal TourX and 2018 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that DTC C0035, C0040, C0045, or C0050 are not set in the EBCM.
    • Go to next step: If none of the listed DTCs are set 
  2. Replace the K19 Suspension Control Module.
  3. Verify the DTC does not set while operating the vehicle within the Conditions for Running the DTC.
    • If the DTC sets 

      Replace the K17 Electronic Brake Control Module.

    • Go to next step: If the DTC does not set 
  4. All OK.