September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Draining & Refilling
- With vehicle raised and drain pan placed under transmission, remove front and side transmission oil pan bolts. Loosen rear pan bolts approximately 4 turns each.
- Pry pan loose carefully with screwdriver, allowing fluid to drain. Remove remaining bolts and oil pan with gasket attached. Remove screen/filter-to-valve body bolts and remove screen filter with gasket.
- Thoroughly clean pan with solvent and dry with compressed air. Install new gasket or "O" rings lubricated with clean oil into new screen/filter assembly and install screen/filter assembly to transmission.
- Use new pan gasket and install pan. Add proper amount of fluid to transmission through filler tube and start engine in "PARK" position with parking brake set.
- With engine idling, move selector lever through all positions, ending in "PARK". Check fluid level and add as required.