Engine Data Parameters
ENGINE DATA PARAMETERS EXPLANATION
| Display | Parameter |
|---|---|
| .0.1 | Throttle angle displayed in degrees. |
| .0.2 | MAP value in kilopascals (kPa). |
| .0.3 | BARO value in kilopasscals (kpa). |
| .0.4 | Coolant temperature in °C. |
| .0.5 | Manifold air temperature in °C. |
| .0.6 | Injector Pulse width is displayed in milliseconds. Decimal point will not appear and MUST be assumed between 2 digits (32 means 3.2 milliseconds). |
| .0.7 | Oxygen sensor voltage is displayed in volts. Decimal point will not appear and MUST be assumed before 2 digits (60 means .60 volts). |
| .0.8 | Spark advance in degrees (2 digits). |
| .0.9 | Ignition cycle value is number of times ignition has been cycled since trouble code was last set. |
| .1.0 | Battery voltage in volts. |
| .1.1 | Engine RPM divided by 10. Engine speed over 2000 RPM is displayed as 199" since this is the highest number the EEC can display. |
| .1.2 | Vehicle speed in MPH. |
| .1.3 | PROM identification number. To ensure that the correct PROMs are installed. |