Test D: Power Windows & Trunk Release Will Not Operate With Ignition In Run Or With Retained Accessory Power (Rap) Feature Activated

RAP RELAY 1 FEED

Condition

Connect Between

⁽¹⁾ Correct Result

RAP Relay 1 Disconnected: Connect Fused Jumper At RAP Relay 1; Ignition In RUN Position & Operating Power Windows

⁽²⁾ 3 (RED/WHT) & 1 (RED/WHT)

⁽³⁾ Power Windows Operate

⁽¹⁾	If Power windows operate, replace RAP Relay 1.

⁽²⁾	For terminal identification, see CONNECTOR IDENTIFICATION .

⁽³⁾	If Power Windows do not operate, check Circuit Breaker 23 and RED/WHT (76) wire for an open or short to ground. Repair/replace as necessary.