Input Tests: Notes

With the ignition switch in RUN, enter the BCM diagnostics and select BCM Input. See BCM Input Display Procedure .

BCM Input	DIC Display "HI"	DIC Display "LO"
BI03	Left Door Completely Closed	Left Door Open
BI04	Right Door Completely Closed	Right Door Open
BI08 (1987)	Air Conditioning Refrigerant Normal	Air Conditioning Refrigerant Low
BI08 (1988)	Air Conditioning Refrigerant Normal	Air Conditioning Refrigerant Low
BI09	Washer Fluid Level Full	Washer Fluid Level Low
BI10	Coolant Level Full	Coolant Level Low
BI21	Brake Fluid Level Full	Brake Fluid Level Low
BI24	Transaxle Position Switch In REVERSE	Transaxle Position Switch In Any Gear Except REVERSE
BI30	Time/Temperature Switch Release	Time/Temperature Switch Pressed
BI41	Coolant Fans Off	Coolant Fans On
BI51	Engine Running (Generator Output)	Engine Off (No Generator Output)
BI60	Theft Alarm Off	Theft Alarm Activated
BI61	Key In Normal Position Or Turned To LOCK Position In Either Door	Key Turned To UNLOCK Position In Either Door
BI62	Soft Top DOWN	Soft Top UP
BI63	Hard Top Disconnected	Hard Top Connected
BI64	Oil Level Low	Oil Level Full
BI90	Multi-Function Lever In Normal Position	Multi-Function Lever In Turn Right Position
BI91	Multi-Function Lever In Normal Position	Multi-Function Lever In Turn Left Position
BI92	Headlights Off	Headlights On
BI93	Headlight Dimmer Switch Released	Headlight Dimmer Switch Pulled & Held
BI94	Anti-Lock Brake System Good	Anti-Lock Brake System Failure
BI95	Brake Pedal Pressed	Brake Pedal Released