Test C: Express Down Window Module Test

Connect test lamp at suspect express down window module (disconnected) See EXPRESS DOWN WINDOW MODULE TEST table.

EXPRESS DOWN WINDOW MODULE TEST

Condition

Connect Test Lamp Between

⁽¹⁾ Correct Result

Turn Ignition Switch To Run

A & Ground

⁽²⁾ Test Lamp Lights

Turn Ignition Switch To Run

B & Ground

⁽³⁾ Test Lamp Does Not Light

Turn Ignition Switch To Run

C & Ground

⁽³⁾ Test Lamp Does Not Light

In The Left Door Switch Assembly, Operate DN Switch (Hold) Associated With Suspect Motor

B & Ground

⁽⁴⁾ Test Lamp Lights

In The Left Door Switch Assembly, Operate UP Switch (Hold) Associated With Suspect Motor

C & Ground

⁽⁴⁾ Test Lamp Lights

⁽¹⁾	If results are correct, reconnect suspect express down window module and go to SYMPTOM INDEX table.

⁽²⁾	If result is not correct, check/repair wiring from terminal A for an open.

⁽³⁾	If result is not correct, check/repair associated wiring from express down window module for a short to voltage. Check for a closed switch in the left door switch assembly and/or right door switch assembly (right window only).

⁽⁴⁾	If result is not correct, check/repair associated wiring from express down window module for an open. Check continuity of switch in the left door switch assembly and/or right door switch assembly (right window only).