LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 1991 >> Allante F7/ME9 >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Computer Module >> System Tests >> Test B: Rap Relay 1
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test B: Rap Relay 1

TEST B: RAP RELAY 1

Condition Connect Between (1) Correct Result
Connect Test Lamp At RAP Relay 1, Disconnected 5 (RED/YEL) & Ground (2) Test Lamp Lights
Connect Test Lamp At RAP RELAY 1, Disconnected 4 (RED) & Ground (3) Test Lamp Lights
(1) If results are correct, go to B: RAP RELAY 1 TABLE 2 
(2) If result is incorrect, check RED/YEL (840) wire for an open.
(3) If result is incorrect, check RED (2) wire for an open or short to ground.
TEST B: RAP RELAY 1

Condition Connect Between Correct Result (1) BCM Display
Connect Test Lamp At RAP RELAY 1, Disconnected & Select BCM Output BO03 5 (RED/YEL) & 2 (BLK/WHT) Test Lamp Lights (2) LO
Connect Test Lamp At RAP RELAY 1, Disconnected & Select BCM Output BO03 5 (RED/YEL) & 2 (BLK/WHT) Test Lamp Does Not Light (2) HI
(1) If the BCM display does not cycle from LO to HI, replace the BCM.
(2) If test lamp lights as shown, check RED/BLK (70) and RED/WHT (76) wires for an open or short to ground. Also check circuit breaker No. 21. If OK, replace RAP relay 1. If test lamp does not light as shown, check/repair BLK/WHT (707) wire for an open or short to ground.
scientia non olet · About LEMON Manuals