LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 1991 >> DeVille Touring >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes >> Diagnostic Testing >> Pcm Data Parameters >> Entering PCM Data Parameters Display
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Entering PCM Data Parameters Display

  1. With ".7.0" displayed on the FDC, (to cause ".7.0" to be displayed on the FDC, see INTRODUCTION TO DIAGNOSTIC TESTING  under DIAGNOSTIC TESTING), depress and release the LO button on the ECCP. This will switch display from ".7.0" to "E.9.0", signaling the start of the PCM data parameters display. Data parameter displays are prefixed with the letter "P".
  2. To advance system to a higher numbered data parameters display, depress the HI button on the ECCP. To return to a lower numbered data parameters display, depress the LO button on the ECCP. For complete list of data parameter displays, see PCM DATA PARAMETERS  table.
scientia non olet · About LEMON Manuals