Input Test EI84 Cruise Resume/ACCEL Switch Test

Test Conditions

After diagnostic trouble codes have been displayed, Driver Information Center (DIC) will display ECM?. Depress HI blower button. Display will change to read ECM DATA?. Depress LO blower button. Display will change to read ECM INPUTS?.

Depress HI blower button. Display will change to read C/C BRAKE EI70. Place cruise control slider switch in ON position. Depress LO blower button 6 times. Display will change to read LO 0 C/C RESUME/ACCEL EI84. When cruise control RESUME/ACCEL button is depressed, display will change to read HI X. Change from 0 to X indicates that test has been successfully completed.

Action

This test detects close of RESUME/ACCEL switch in turn signal lever at terminal C3 of PCM. Cruise switch must be ON to perform this test. Switch test EI82 should be performed before this test to ensure power to RESUME/ACCEL switch.

NOTE: Test numbers refer to test numbers on diagnostic chart.

LO indicates that RESUME/ACCEL switch is open. HI indicates switch is closed.

NOTE: Figures 17-19 are Courtesy of General Motors Corp.

Fig 1: Input Test EI84 Cruise RESUME/ACCEL Switch Test Schematic (1991)

Fig 2: Input Test EI84 Cruise RESUME/ACCEL Switch Test Schematic (1992)

Fig 3: Input Test EI84 Cruise RESUME/ACCEL Switch Test Flow Chart (All)