Display Configuration

After the diagnostic trouble codes have been displayed the Driver Information Center (DIC) will display PCM?. Depress the HI blower button. The display will change to read PCM data. Depress the LO blower button. The display will change to read PCM INPUTS.

Depress the HI blower button. The display will change to read C/C BRAKE EI70. Place the Cruise Control ON/OFF switch in the ON position. Depress the LO blower button five times the display will change to read LO 0 C/C SET/CO EI83. When the Cruise Control Set Coast switch is depressed the display will change to read HI X. The change from 0 to X indicates that the test has been successfully completed.