EI84: Cruise Control RESUME/ACCEL Switch

This test detects closing of RESUME/ACCEL switch in turn signal lever at terminal C3 of PCM. See Figure . To activate test, slide RESUME/ACCEL switch. Cruise control switch must be in ON position to perform this test. HI means RESUME/ACCEL button is closed (pushed) and PCM has 12 volts on resume/accel input. LO means RESUME/ACCEL button is open (not pushed) and PCM has zero volts on resume/accel input. X means RESUME/ACCEL switch has been disengaged and a change in switch state has been detected.