LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 1992 >> Fleetwood Sixty Special >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Pressure Regulator >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Fuel Pressure Regulator: Installation

To install, reverse removal procedure. Always replace "O" rings. Lubricate fuel rail seal with oil and install in regulator. Tighten bolts to specification. See TORQUE SPECIFICATIONS  table at end of article.



  1. To install, reverse removal procedure. Lubricate new "O" rings with oil. Install fuel return "O" rings on fuel rails. Return "O" rings are larger in diameter than connector tube "O" rings.
  2. Tighten bolts to specification. See TORQUE SPECIFICATIONS  table at end of article.


To install, reverse removal procedures. Install new "O" rings and lubricate with oil. Tighten retaining bolts to specification. See TORQUE SPECIFICATIONS  table at end of article.

scientia non olet · About LEMON Manuals