DTC B332: Loss Of Abs/TCS Data: Description

DTC B332 will set if the ignition is ON and the BCM is not able to exchange data with the EBTCM (if any other communication codes are stored along with B332, see MULTIPLE INTERMITTENT CODES  ). When this is the only communication code stored, the problem must be one of the following:

• An open in CKT 800H between the EBTCM and the BCM.
• An open or short in the EBTCM power or ground circuits.
• A faulty EBTCM.

During the time the failure is present, no EBTCM diagnostic information will be available for display. The Red BRAKE telltale will be illuminated on the IPC and the Anti-lock Disabled and Traction Disabled messages will be displayed on the CCDIC. Also, while in the service diagnostic mode, this code will remain active, always checking for proper operation.