Right Mirror Does Not Operate
- Place mirror select switch in right position. Toggle mirror position switch between up and down positions. With mirror control switch connector still connected, using test light, backprobe between terminal "E" (Yellow wire) and terminal "F" (Light Blue wire) of mirror control switch connector.
- If test light does not light, replace mirror control switch. If test light comes on, toggle mirror position switch between left and right positions. Backprobe between terminal "F" (Light Blue wire) and terminal "G" (White wire) of mirror control switch connector.
- If test light does not light, replace mirror control switch. If test light comes on, check for open or shorted wires and connections. If wires and connections are okay, replace right outside mirror drive unit.