Remote Control Door Lock Receiver/Theft Deterrent Module

Transmitter Will Not Program

1) Front probe Remote Control Door Lock Receiver/Programming Connector with voltmeter connected between terminal "B" (Black/White wire) and ground. If battery voltage is present, program a known good transmitter. If system is still inoperative, replace Remote Control Door Lock Receiver/Theft Deterrent Module (RCDLR/TDM).

2) If no voltage is present, check for open or short to ground in Black/White wire, or for poor connection at RCDLR/TDM connector terminal C11 (Black/White wire). If wire and connection are okay, replace RCDLR/TDM.