Diagnostic Procedures
- Perform On-Board Diagnostic (OBD) System Check. After performing OBD system check, go to next step.
- Using scan tool, select DTC INFO and note if this DTC has failed this ignition cycle. If DTC did fail this ignition, go to next step.
- Check EBTCM system for any history ABS/TCS DTC(s) or system problems. If any other DTC(s) or problems are noted, diagnose EBTCM system using appropriate ANTI-LOCK BRAKE SYSTEM article in the BRAKES section. If not other DTC(s) are present, fault is not present. See DIAGNOSTIC AIDS.