DTC PZ2472, Low Beam Output Fault: Notes
WARNING: This page is about a different car, the 1996 Cadillac Seville and 1996 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
Low beams are commanded by PZM through an output to headlight relay. When output is grounded, headlight input to IPC is also grounded.
A short to ground will be tested when exterior lights power is active, low beam output is inactive, headlight switch is not active, and DTC PZ1970 is not set as current. A short to battery will be tested when exterior lights power is active, low beam output is active, and DTC PZ1970 is not set as current.
DTC PZ2472 will set when commanded state of low beams does not match feedback state. When DTC PZ2472 is set, PZM will continue to command state requested until IPC revokes request. DTC PZ2472 will clear when commanded state matches feedback state.