DTC PZ2473, High Beam Output Fault: Notes
WARNING: This page is about a different car, the 1996 Cadillac Seville and 1996 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
High beams are commanded by PZM through an output to LO/HI beam control relay. When headlight relay is energized, LO/HI beam control relay provides power source to low beams or high beams. DTC PZ2473 will set when commanded state of high beams does not match feedback state. When DTC PZ2473 is set, PZM will continue to command state requested until IPC revokes request. DTC PZ2473 will clear when commanded state matches feedback state.