Wheel Alignment Specifications

WARNING: This page is about a different car, the 1996 Cadillac Seville and 1996 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.

WHEEL ALIGNMENT SPECIFICATIONS

Application

Preferred

Range

Camber ⁽¹⁾

Front ⁽²⁾

Left

-.5 To .5

Right

-.5 To .5

Cross Camber

-.75 To .75

Rear

-0.5 To 0.5

Caster ⁽¹⁾

2.5

1.5 To 3.5

Toe-In ⁽¹⁾

Front

0.2

0 To 0.4

Rear

0.2

0 To 0.4

Toe-In ⁽³⁾

Front

0.1 (2.5)

0 To 0.2 (0 To 5.0)

Rear

0.1 (2.5)

0 To 0.2 (0 To 5.0)

⁽¹⁾	Measurement is in degrees.

⁽²⁾	This is a revised specification. See GM TSB 53-31-03, issued December 1995. See TECHNICAL SERVICE BULLETIN .

⁽³⁾	Measurement is in inches (mm).