Engine Mechanical Specifications

Bearing Material Aluminum
Clearance Between Bearing and Crankshaft
New Limits 0.025-0.076 mm (0.001-0.003 in.)
Worn Limits (Not Over) 0.076 mm (0.003 in.)
Diameter, Lower End (Without Bearing) 57.144 mm(2.249 in.)
Piston Pin Hole 22.022-22.008 mm (0.8662-0.866 in.)
Length, Center to Center 151 mm (5.94 in.)
End Play of Rods on Crank Pin 0.20-0.50 mm (0.008-0.020 in.)