July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Main Bearing Clearances

Main Bearing Clearance Limit	New Limit	0.0006 - 0.002
	Worn Limit	0.0025
Main Bearing Journal	Diameter	2.5335 - 2.5340
	Out-of-Round (Not Over)	0.00016
	Taper	0.00016
	Length-No. 1	0.969
	Length-No. 2	0.969
	Length-No. 3	0.992
	Length-No. 4	0.969
	Length-No. 5	0.969
End Play in Crankshaft-New Limits		0.002 - 0.019
End Play in Crankshaft-Worn Limits		0.020