LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 1999 >> Seville STS >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> Diagnostic Tests >> DTC B1656: EEPROM Write Error >> Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC B1656: EEPROM Write Error: Testing

  1. If body control system diagnostic check has been performed, go to next step. If body control system diagnostic check has not been performed, perform body control system diagnostic check. See BODY CONTROL SYSTEM DIAGNOSTIC CHECK  under SYSTEM TESTS.
  2. Turn ignition switch to ON position. Using scan tool, clear DTCs. Turn ignition switch to OFF position. Turn ignition switch to ON position and recheck for DTCs. If DTC B1656 resets, go to next step. If DTC B1656 does not reset, go to step  4 .
  3. Replace module responsible for setting DTC. After replacing affected module, go to next step.
  4. Reconnect all components and connectors. Turn ignition switch to ON position. Using scan tool, clear DTCs. After clearing DTCs, perform body control system diagnostic check. See BODY CONTROL SYSTEM DIAGNOSTIC CHECK  under SYSTEM TESTS.
scientia non olet · About LEMON Manuals