Charge Indicator Light Always On
NOTE:
Connector C102 (Brown), in circuit between instrument panel and generator, is located in left front corner of engine compartment, behind battery.
- Disconnect generator connector C2 (Blue/White wire). Turn ignition on. If charge indicator light illuminates, go to step 3. If charge indicator light does not illuminate, go to next step.
- Replace generator. See GENERATOR under REMOVAL & INSTALLATION. Go to step 6.
- Disconnect connector C102. If charge indicator light is still illuminated, go to step 5. If charge indicator light goes out, go to next step.
- Locate and repair short in circuit between generator connector C2 and connector C102 terminal No. 3. See WIRING DIAGRAMS . Go to step 6.
- Locate and repair short in circuit between instrument panel connector terminal No. 18 and connector C102 terminal No. 3. See WIRING DIAGRAMS . If no short exists, replace instrument panel. Go to step 6.
- Reconnect all connectors and recheck charge indicator light. If charge indicator light is not operating properly, go to step 1.