Dash Integration Module Replacement

REMOVAL PROCEDURE

IMPORTANT: Before replacement of the DIM module (1), record the personalization settings in order to transfer the settings after the DIM module (1) has been replaced.




1. Remove the right sound insulator.
2. Disconnect the DIM module electrical connectors (2).




3. Depress inward on the locking tab (2).
4. With the locking tab (2) depressed, slide the DIM module (2) downward.
5. Remove the DIM module (1) from the bracket.

INSTALLATION PROCEDURE




1. Install the DIM module to the bracket.
2. Slide the DIM module upward until the DIM module and the locking tab are fully engaged.




3. Connect the DIM module electrical connectors (2).
4. Install the right sound insulator.
5. Reprogram the DIM module (1). Programming and Relearning