Changing Automatic Door Lock/Unlock/Illumination Mode

Close all vehicle doors. Turn ignition switch RUN position. Using the Driver Information Center (DIC), press and hold the SKIP INFO and NO INFO RESET buttons at the same time to display the following:
- DOORS LOCK IN GEAR
  
  All doors lock when shifted out of Park. Choose yes and FEATURE ON will be displayed. You will be prompted to DRIVR UNLOCK IN PARK. Choose no and FEATURE OFF will be displayed. You will be prompted to LGHTS FLSH AT UNLOCK.
- DRIVR UNLOCK IN PARK
  
  All doors lock when shifted out of Park; only driver's door unlocks when shifted into Park. Choose yes and FEATURE ON will be displayed. You will be prompted to LGHTS FLSH AT UNLOCK. Choose no and FEATURE OFF will be displayed. You will be prompted to DRIVR UNLOCK KEY OFF.
- DRIVR UNLOCK KEY OFF
  
  All doors lock when shifted out of Park; only driver's door unlocks when ignition is turned off. Choose yes and FEATURE ON will be displayed. You will be prompted to LGHTS FLSH AT UNLOCK. Choose no and FEATURE OFF will be displayed. You will be prompted to DOORS UNLOCK IN PARK.
- DOORS UNLOCK IN PARK
  
  All doors lock when shifted out of Park and unlocks when shifted into Park. Choose yes and FEATURE ON will be displayed. Choose no and you will be prompted to DOORS UNLOCK KEY OFF.
- DOORS UNLOCK KEY OFF
  
  All doors lock when shifted out or Park; all doors unlock when ignition is turned off. Choose yes or no and you will be prompted to LGHTS FLSH AT UNLOCK.
- LGHTS FLSH AT UNLOCK
  
  Parking lights blink twice when unlock button is pressed on remote keyless entry transmitter.
- LIGHTS FLASH AT LOCK
  
  Parking lights blink once when lock button is pressed on remote keyless entry transmitter.
- HORN SOUNDS AT LOCK
  
  Horn sounds once when lock button is pressed on remote keyless entry transmitter.
- EXT LIGHTS AT UNLOCK
  
  All exterior lights will come on for approximately 20 seconds after unlock button is pressed on remote keyless entry transmitter.
Select YES TRIP RESET for yes, NO INFO RESET for no or SKIP INFO to skip after each prompt is displayed to continue to next prompt. DIC display will confirm changes by displaying FEATURE ON. If feature is not selected DIC will display FEATURE OFF.