Fastener Tightening Specifications
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Blower Motor Control Module Retaining Screws | 1.6 N.m | 14 lb in |
| Blower Motor Control Processor Retaining Screws | 1.6 N.m | 14 lb in |
| Floor Air Outlet Duct Retaining Screws | 1.6 N.m | 14 lb in |
| HVAC Control Module Retaining Screws | 1.9 N.m | 17 lb in |
| Ignition Switch Retaining Bolts | 5.5 N.m | 49 lb in |
| IPC to Steering Column Bracket Retaining Bolts | 3.5 N.m | 31 lb in |
| Temperature Actuator Retaining Screws | 1.5 N.m | 13 lb in |
| Vacuum Control Solenoid Valve Retaining Screws | 1.5 N.m | 13 lb in |
| Vacuum Tank Retaining Screws | 3.5 N.m | 31 lb in |