LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2000 >> Escalade >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Remote Keyless Entry Systems - Old Style >> Programming >> Transmitter Programming (Base)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmitter Programming (Base)

  1. Ground terminal No. 4 (Black) to terminal No. 8 (Black/White wire) at Data Link Connector (DLC) located under lower left side of instrument panel. Receiver will respond by locking and unlocking all doors and activating liftgate window release (if equipped) within 2 seconds.
  2. Depress and hold both LOCK and UNLOCK buttons of first transmitter to be reprogrammed until locks cycle (about 10 seconds).
  3. Repeat step  2 for all remaining transmitters to be reprogrammed (if equipped). Control module will again respond by locking/unlocking all doors and activating liftgate window release (if equipped). Remove ground from DLC terminals. Transmitter operation can be verified by locking and unlocking doors and automatically activating liftgate window release.
  4. Remove ground wire from DLC. Activate transmitters to verify operation.
scientia non olet · About LEMON Manuals