Scan Tool Data Definitions

8-Digit GM Part Number  The scan tool displays an 8 digit number which indicates the GM part number of the module.

# of Fobs Programmed  The scan tool displays 1 Fob - 4 Fobs to indicate the number of keyless entry transmission that are programmed for the system.

Calibration ID  The scan tool displays a 4 digit number which indicates the calibration ID number of the module.

Invalid Transmitter  The scan tool displays More Than 10 or Less Than which indicates how many times an invalid transmitter has been used in the vicinity of the vehicle.

Key Fob 1 Low Voltage  The scan tool displays counts which indicate the number of times a low battery voltage level was received.

Key Fob 2 Low Battery Status  The scan tool displays OK to indicate a good battery voltage level was last received.

Key Fob 2 Low Voltage  The scan tool displays counts which indicates the number of times a low battery voltage level was received.

Key Fob 2 Battery Status  The scan tool displays OK to indicate a good battery voltage level was last received.

Key Fob 3 Low Voltage  The scan tool displays counts which indicates the number of times a low battery voltage level was received.

Key Fob 3 Battery Status  The scan tool displays OK to indicate a good battery voltage level was last received.

Key Fob 4 Low Voltage  The scan tool displays counts which indicates the number of times a low battery voltage level was received.

Key Fob 4 Battery Status  The scan tool displays OK to indicate a good battery voltage level was last received.

Key Pressed on Fob  The scan tool displays Dr. Door Unlock, Unlock, Door Lock, All Door Unlock, Trunk, or Fuel Door/Alarm which indicates keyless entry transmitter button was last pressed.

Last Fob Used  The scan tool displays Fob#1 - Fob#4 which indicates the number of the last keyless entry transmitter used.

PROM ID  The scan tool displays a 4 digit number which indicates the ID number of the PROM associated with the module.