Connecting Rod Specifications
| Diameter, Crankshaft End (Without Bearings) | 2.2495 - 2.2501 | |
| Taper (Maximum) | 0.0002 | |
| Piston Pin End, With Bushing | 0.8269 - 0.8274 | |
| Taper (Maximum) | 0.0003 | |
| Without Bushing | 0.9234 - 0.9421 | |
| Width | 0.8572 | |
| Center to Center | 5.9449 | |
| Side Clearance (Pair of Connecting Rods on Crankpin) | 0.0079 - 1.0197 | |
| Connecting Rod Bolt | First Pass | 37 |
| Second Pass | Back off to zero | |
| Third Pass | 18 | |
| Final Pass | +110 degrees |