LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2000 >> Seville STS >> Repair and Diagnosis >> External Pages >> Different car >> Section 205 (Cruise Control System) >> Repair Instructions >> Cruise Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2002 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the cruise control module (1) to the bracket (2).
  2. Install the cruise control module bracket fasteners (3).

    Tighten 

    Tighten the fasteners to 7.5 N.m (66 lb in).

    Fig 1: Installing Cruise Control Module, Bracket & Fastener
    G01797243Courtesy of GENERAL MOTORS CORP.
  3. Install the cruise control module (1) onto the studs on the cowl.
  4. Install the fasteners (2).

    Tighten 

    Tighten the cruise control mounting fasteners to 9 N.m (80 lb in).

  5. Connect the electrical connector to the cruise control module (1).

    Important:  The cruise control cable does not require mechanical adjusting after the replacement. The cruise control module internally adjusts the cable. Refer to Cruise Control Description and Operation  for the complete operational details.

  6. Install the cruise control cable. Refer to Cruise Control Cable Replacement .
    Fig 2: Installing Fasteners & Cruise Control Module Assembly
    G01797244Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals