Dash Integration Module: Installation

WARNING: This page is about a different car, the 2002 Cadillac Seville and 2001 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.

Install the DIM to the bracket. See Fig 1 .
Slide the DIM upward until it is fully engaged. See Fig 1 .
Connect the DIM electrical connectors (2). See Figure .
Install the right sound insulator.
Reprogram the DIM. See appropriate BODY CONTROL MODULES article in ACCESSORIES & EQUIPMENT.

Fig 1: Installing DIM

Courtesy of GENERAL MOTORS CORP.