Dash Integration Module: Removal

WARNING: This page is about a different car, the 2002 Cadillac Seville and 2001 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Before replacing the DIM, record the personalization settings in order to restore the settings after the new module is installed.

Remove the right sound insulator (hush panel under dash).
Disconnect the DIM (1) electrical connectors (2). See Fig 1 .
Depress inward on the locking tab (2). See Fig 2 .
With the locking tab (2) depressed, slide the DIM (1) downward. See Fig 2 .
Remove the DIM from the bracket.

Fig 1: Identifying DIM Harness Connectors

Courtesy of GENERAL MOTORS CORP.

Fig 2: Removing DIM

Courtesy of GENERAL MOTORS CORP.