Transmission Control Module
NOTE:
The following procedure requires Techline equipment.
- TCM must be programmed with proper software/calibrations. Ensure battery is fully charged, ignition is on and Techline equipment cable connection at DLC is secure before proceeding.
- Program TCM using latest software matching vehicle. Refer to up-to-date Techline equipment user's instructions. If TCM fails to program, check the following:
- Ensure TCM connection is okay.
- Inspect Techline equipment for latest software version.
- Attempt to program TCM. If TCM still cannot be programmed properly, replace TCM. Replacement TCM must also be programmed.