DTC B3031: Key Decoder Device In Assembly Learn Mode: Testing
NOTE:
For this DTC to set, a key with a working transponder was read by theft deterrent control module. For that key to operate vehicle a 10 Minute or 30 Minute Re-Learn Procedure must be performed.
- If theft deterrent diagnostic system check has been performed, go to next step. If theft deterrent diagnostic system check has not been performed, perform THEFT DETERRENT DIAGNOSTIC SYSTEM CHECK under SELF-DIAGNOSTIC SYSTEM.
- Perform program programming theft deterrent system components procedure. See PROGRAMMING THEFT DETERRENT SYSTEM COMPONENTS under PROGRAMMING. After completing procedure, go to next step.
- Using scan tool, clear DTCs and check system operation. Operate vehicle within code enable criteria. See CODE ENABLE CRITERIA . If DTC does not reset, testing is complete. If DTC resets, go to step 2 .