Removal & Installation

WARNING: This page is about a different car, the 2001 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Before replacing Dash Integration Module (DIM), record personalization settings, to transfer into new module. See DASH INTEGRATION MODULE under PROGRAMMING.

Disconnect negative battery cable. Remove right sound insulator from under right side of dash. Disconnect DIM harness connectors. Depress locking tab inward and slide DIM downward. Remove DIM from bracket. To install, reverse removal procedure. Program DIM. See DASH INTEGRATION MODULE under PROGRAMMING.