Removal Procedure
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Open the instrument panel (IP) passenger compartment door (1).
- Use a small flat blade screwdriver behind the top right hand side of the switch mounting to pry the inflatable restraint IP module switch (4) from the switch mounting in the instrument panel (IP) passenger compartment door (1).
- Remove the CPA (2) from the wiring harness connector (3).
- Disconnect the wiring harness connector (3) from the inflatable restraint IP module switch (4) connector.
Fig 1: CPA, Wiring Harness Connector, Passenger Compartment Door & Inflatable Restraint IP Module Switch