LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2001 >> Seville STS >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Supplemental Inflatable Restraint System) >> Repair Instructions >> Inflatable Restraint Instrument Panel (I/P) Module Disable Switch LED Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: IP Accessory Trim Plate, Wiring Harness Connector & Electrical Led Connector
    GM624417Courtesy of GENERAL MOTORS CORP.
  1. Open the console compartment door.
  2. Lift up on the IP accessory trim plate (1) to gain access to the LED wiring connector (2).
  3. Disconnect the electrical LED connector (2) from the wiring harness connector (3).
  4. Use the J 35616  to extract terminals from the LED connector (2).
  5. Push up on LED (4) from underneath IP accessory trim plate (1) and remove.
scientia non olet · About LEMON Manuals