Installation Procedure
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the wiring harness connector (3) to the inflatable restraint IP module switch (4) connector.
- Install the CPA (2) on the wiring harness connector (3).
- Insert the inflatable restraint IP module switch (4) into the switch mounting in the instrument panel (IP) compartment door (1) and snap into place.
- Close the instrument panel (IP) passenger compartment door (1).
Fig 1: CPA, Wiring Harness Connector, Passenger Compartment Door & Inflatable Restraint IP Module Switch