Installation Procedure
- Install the steering wheel control switch to the steering wheel.
- Install the steering wheel control switch mounting screws.
Tighten: Tighten the mounting screws to 2 N.m (20 lb in).
- Connect the electrical connector (1) to the steering wheel control switch.
- Install the horn switch to the steering wheel.
Tighten: Tighten the steering wheel horn switch to 5.5 N.m (50 lb in).
- Install the steering wheel. Refer to Steering Wheel Replacement .
NOTE:
Refer to FASTENER NOTICE
in Cautions and Notices.