Scan Tool Data Definitions: Data
- Battery Voltage
-
The scan tool displays 0-17 volts. The battery voltage available to the Electronic Brake Control Module (EBCM).
- EVO Actual Current
-
The scan tool displays the current the control module is actually commanding to the EVO solenoid.
- EVO Command
-
The scan tool displays the state of the EVO solenoid.
- EVO Desired Current
-
The scan tool displays the current the control module is trying to command to the EVO solenoid.
- EVO Drive PWM
-
The scan tool displays the percentage of available voltage for the EVO solenoid.
- EVOHI Feedback
-
The scan tool displays the output voltage from the control module to the EVO solenoid.
- EVO Input Current
-
The scan tool displays the input voltage to the control module of the EVO solenoid.
- EVOLOW Feedback
-
The scan tool displays the return voltage from the EVO solenoid to the control module.
- Steering Wheel Position Sensor
-
The scan tool displays the output voltage of the of the steering wheel position sensor.
- Steering Wheel Position Signal 1
-
The Scan Tool displays the output voltage of the signal 1 circuit of the Steering Wheel Position Sensor.
- Steering Wheel Position Signal 2
-
The scan tool displays the output voltage of the signal 2 circuit of the Steering Wheel Position Sensor.
- Steering Wheel Rate
-
The scan tool displays the speed at which the steering wheel is turning.
- Vehicle Speed
-
The scan tool displays vehicle speed via a class 2 serial data circuit from the powertrain control module (PCM).