LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2002 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (Supplemental Inflatable Restraint System) >> Removal & Installation >> Front End Discriminating Sensor >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 GMC C3500 HD, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM .
  2. Remove engine protection shield, if equipped. Remove Connector Position Assurance (CPA) clip from front end discriminating sensor connector and disconnect connector. Remove front end discriminating sensor mounting bolt. Remove front end discriminating sensor.
  3. To install, reverse removal procedure. Tighten front end discriminating sensor connector to specification. See TORQUE SPECIFICATIONS . Activate air bag system.
Fig 1: Identifying Front End Discriminating Sensor
G99G26233Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals