LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2002 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1445 (Hybrid Control System) >> Diagnostic Information and Procedures >> Scan Tool Output Controls
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Scan Tool Output Controls

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Engine Control Module (ECM) Hybrid

Scan Tool Output Control Additional Menu Selection(s) Description
APM Mode High to Low Engine Control Module, Special Functions, Hybrid Outputs 36V DC to 12V DC
Auto Start/Stop Command Engine Control Module, Special Functions, Hybrid Outputs Commands Auto Start/Auto Stop
AUX. Trans. Pump Engine Control Module, Special Functions, Hybrid Outputs Commands the AUX. Transmission pump ON/OFF.
Batt End of Life Est Reset Engine Control Module, Special Functions, Hybrid Outputs Reset Battery life to 100 percent
Brake Pres. Sensor 2 Learn Engine Control Module, Special Functions, Hybrid Outputs Calibrates the brake pressure 2 sensor
Charge/Assist Gauge Engine Control Module, Special Functions, Hybrid Outputs Drives the gauge from minimum to maximum
Contactor Control Engine Control Module, Special Functions, Hybrid Outputs Commands the Hybrid Battery Contactor OPEN/CLOSED
Economy Mode Lamp Engine Control Module, Special Functions, Hybrid Outputs The scan tool commands the indicator ON/OFF.
Engine Clnt. Pump Relay Engine Control Module, Special Functions, Hybrid Outputs Command the Aux. Coolant ON/OFF
Hill Hold Lamp   The scan tool commands the indicator ON/OFF.
Hood Ajar Lamp Engine Control Module, Special Functions, Hybrid Outputs The scan tool commands the indicator ON/OFF.
Hybrid Batt Charge Hrs Engine Control Module, Special Functions, Hybrid Outputs Resets Charged AMP hours with new battery.
Hybrid Batt Discharge Amp Hrs Engine Control Module, Special Functions, Hybrid Outputs Resets Discharged AMP hours with new battery.
Hybrid Batt SOC Low Engine Control Module, Special Functions, Hybrid Outputs Override SOC set point to 0 percent
Hybrid Batt SOC High Engine Control Module, Special Functions, Hybrid Outputs Override SOC set point to 100 percent
Hybrid Disable Engine Control Module, Special Functions, Hybrid Outputs Disables/Enables Hybrid Function.
SGCM Coolant Pump Engine Control Module, Special Functions, Hybrid Outputs Commands the SGCM coolant pump ON/OFF.
Starter Enable Engine Control Module, Special Functions, Hybrid Outputs Cranks Engine with Starter/Generator
Starter/Generator Control Module (SGCM)

Scan Tool Output Control Additional Menu Selection(s) Description
SGCM Field Current Starter/Generator Control Module, Special Funcitons Commands the Starter/Generator Field Current ON/OFF.
Battery Energy Control Module (BECM)

Scan Tool Output Control Additional Menu Selection(s) Description
Battery Pack Fan Speed Battery Energy Control Module, Special Functions Commands the Battery Pack Fan ON/OFF