LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2002 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Body Control Modules) >> Self-Diagnostic System >> Body Rear End System Diagnostic System Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Body Rear End System Diagnostic System Check

WARNING: This page is about a different car, the 2002 Chevrolet Monte Carlo, 2002 Chevrolet Impala, 2001 Chevrolet Monte Carlo, and 2001 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Use this check as starting point for any body rear end system complaint.
  1. Turn ignition switch to OFF position. Connect scan tool to Data Link Connector (DLC). Turn ignition switch to RUN position. If scan tool powers up, go to next step. If scan tool does not power up, go to TEST D: SCAN TOOL DOES NOT POWER UP  under SYSTEM TESTS.
  2. Turn ignition switch to RUN position. Try to establish scan tool communication with Body Control Module (BCM). If communication with BCM is established, go to next step. If communication with BCM is not established, go to TEST C: SCAN TOOL DOES NOT COMMUNICATE WITH CLASS 2 DEVICE  under SYSTEM TESTS.
  3. Select DISPLAY DTC function for BCM. Record all displayed DTCs and status of displayed DTCs. If any DTCs are displayed, go to next step. If no DTCs are displayed, repair trunk release system as necessary. See appropriate POWER DOOR LOCKS & TRUNK RELEASE article.
  4. Using scan tool, retrieve DTCs. If DTCs U1000-U1305 are not present, go to next step. If DTCs U1000-U1305 are present, go to TEST C: SCAN TOOL DOES NOT COMMUNICATE WITH CLASS 2 DEVICE  under SYSTEM TESTS.
  5. Check for DTC B1000. If DTC is not present, go to next step. If DTC B1000 is present, go to DTC B1000: CONTROL MODULE MALFUNCTION  under DIAGNOSTIC TESTS.
  6. Check for DTC B1295. If scan tool displays DTC C1295, perform appropriate test. See appropriate ANTI-LOCK article in BRAKES. If scan tool does not display DTC C1295, go to DIAGNOSTIC TROUBLE CODE DEFINITIONS . Repair as necessary.
scientia non olet · About LEMON Manuals