Test Description
WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
The numbers below refer to step numbers in diagnostic procedure.
- 3 - This step tests each fuel injector resistance within a specific temperature range. If any fuel injectors display a resistance outside of specified value, replace fuel injector.
- 4 - This step determines if all fuel injectors are within 3 ohms of each other. If highest resistance value is within 3 ohms of lowest resistance value, then all fuel injector coil windings are okay.
- 6 - This step determines if the ignition 1 voltage circuit under the intake plenum is causing the concern.
- 8 - This step determines which fuel injector is faulty. After subtracting highest and lowest resistance values from average value, replace fuel injector that has greatest resistance difference from average.